Emtek Door Mortise Lock-Keyed Manuel d'utilisateur télécharger pdf

See included template for door prep specifications

Outside Trim

Inside Trim

Door Jamb Prep.

IN4-POCKETMORTISE

REV. 5/27/09

After threading both inside & outside cylinders into

lock body, tighten locking screw counter clockwise

to engage notches on both cylinders.

NOTE: DO NOT OVER TIGHTEN SCREW.

Installation Instructions - Pocket Door Mortise Lock

Drill two 1/8” pilot holes for wood screws provided).

Thread Drive Bar Cylinder into lock body.

NOTE: Drive Bar Socket must be in the

12 o’clock position as shown.

Install lock body into door.

Note: Notch on cylinder must be in the 9 o’clock

position when fully screwed into lock body.

Note: Key Cylinder notch must be at the

3 o'clock position when fully screwed in lock body.

Drill two 1/8” pilot holes

7-1/8” apart on center.

Drive bar

socket

Note: Outside cover must

be installed before cylinder.

Note: Install

inside cover last.

IN4-POCKETMORTISE 1
REV. 5/27/09 1

Résumé du contenu

Page 1 - REV. 5/27/09

See included template for door prep specifications Outside Trim Inside Trim Door Jamb Prep. IN4-POCKETMORTISE REV. 5/27/09 After threading both inside

Commentaires sur ces manuels

Pas de commentaire

Emtek Door Mortise Lock-Keyed Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la maison Emtek Door Mortise Lock-Keyed. Emtek Door Mortise Lock-Keyed User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Emtek Door Mortise Lock-Keyed