Emtek Modern Keypad Leverset Locksets (Adjustable Latch) Manuel d'utilisateur télécharger pdf (Page 4)

Use a Phillips head screwdriver to remove screws (item #4c) shown below and

detach Inside Trim Plate from the Inside Chassis.

Fasten Adjustable Latch using two #8 x ¾” Wood Screws (item #6).

2. Remove Screws from Inside Trim Plate

How to Install

REMOVE INSIDE

CHASSIS FROM

TRIM PLATE BEFORE

INSTALLING THE

OUTSIDE TRIM.

THUMBTURN MUST

BE IN NEUTRAL

POSITION.

To remove Pin:

Push Plastic Latch Pin (item #9)

through latch with screwdriver.

The Adjustable Latch is factory

shipped with a 2¾” backset

position. Remove pin and slide

spindle hub forward for a 23/8”

backset, then reinsert the pin in

the hole at the back of the latch

as shown.

1. Install Adjustable Latch

LH RH

See Page 3 for Handing

Information.

Plastic Latch Pin

Plastic

Latch

Scan QR code for

installation video

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Emtek Modern Keypad Leverset Locksets (Adjustable Latch) Manuel d'utilisateur Page 4